Audiomatica Clio Pocket

  • 687,90 €

Clio Pocket is a powerful but lightweight portable measurement system. The system is composed of multi-platform Clio Pocket software, Clio CP-01 Audio Interface

I lager.
Clio Pocket is a powerful but lightweight portable measurement system. The system is composed of multi-platform Clio Pocket software, Clio CP-01 Audio Interface hardware plus accessories. The Clio CP-01 Audio Interface uses an USB 2.0 connection for maximum portability and compatibility with current and future computer hardware architectures.

TECHNICAL SPECIFICATIONS

CP-01 AUDIO INTERFACE
GENERATOR
24 Bit sigma-delta D/A Converter
Frequency range:1Hz-45kHz
Frequency accuracy:better than 0.01%
Frequency resolution:0.01Hz
Output impedance:150 Ohm
Max output level (Sine):13dBu (3.46Vrms)
Attenuation:0.1 dB steps to full mute
THD+Noise(Sine):0,008%
AC ANALYZER
24 bit sigma-delta A/D Converter
Input range:+40 ÷ -40dBV
Max input acceptance:+40dBV (283Vpp)
Input impedance:64kOhm (5.6kOhm mic)
Phantom power supply:8.2V
DC ANALYZER
12 bit A/D Converter
Input range:± 6.5V
MISCELLANEOUS
Sampling frequencies:96kHz and 48kHz
Connections:analog RCA in and out
Digital connection:USB 2.0 port
Power supply:USB powered (480 mA)
Dimensions (cm):9(w)x12(d)x2.5(h)
Weight:0.3 kg
MIC-02 MICROPHONE
TYPECondenser Electret
Accuracy (direct field)±1 dB 20Hz÷10KHz, ±2 dB 10÷20KHz
Maximum level130 dB SPL
Sensitivity (average)13mV/Pa
Dimensions8mm diameter, 12 cm long

The CLIO Pocket software has been designed with a multi-platform engine which allows the software to run under Windows and OSX.

CLIO POCKET SOFTWARE

CLIO Pocket software sports a new redesigned interface with modern and easy to use feel.

CLIO Pocket has a powerful set of features:

  • Self calibration of CLIO CP-01 hardware
  • Impulse Response analysis using LogChirp stimulus:  possible application are anechoic frequency response measurement of  transducers, impedance measurements, distortion measurements
  • FFT analysis with powerful trigger functions
  • RLC meter with component selection functions
  • Thiele and Small parameters calculation with Rdc reading
  • Waterfall CSD and Cycle Wavelet analysis
CLIO Pocket 1.0CLIO Pocket 2.2CLIO Pocket 3.0
System
macOS Catalina and upward compatibility××
Log Chirp Analysis
Amplitude, frequency and time calibrated IR×××
2nd, 3rd and THD harmonic response××
Phase and group delay response×××
Time Impulse, step, Schroeder decay, ETC response×××
Math processing: Merge, dB Shift, MIB×××
Math processing: Add, Subtract, Divide by file×××
Math processing: Add, Multiply by value××
Math processing: LP, HP, BP filters××
Math processing: Divide by file for impedance×
Save Impulse time data to .wav file××
AutoStore to Overlay function (10 curves on screen)×××
OVERLOAD and LEVEL LOW automatic detection×
Export ASCII or Excel data to file or clipboard××
Enhanced distortion data export×
Dedicated Hot Keys to facilitate measurement inspection××
AutoSave function with automatic file name generation××
Dedicated procedure and controls for executing polar measurements sets××
FFT and RTA Analysis
Narrow-band FFT analyzer×××
Real-Time fraction-of-octave analyzer (RTA)×××
Programmable event and OneShot trigger×××
Bar Graph with Max Hold display×
Save acquired time data to .wav file×××
Export ASCII or Excel data to file or clipboard××
AutoStore to Overlay function (10 curves on screen)××
AutoSave function with automatic file name generation××
Internal Tigger×
Signal generator and output controls
Computer Audio Devices Playback Control×
Dedicated panel with on-the-fly controls×××
Plays standard .wav files×××
Highly Optimized waveform calculator×××
Direct 3-digit input of output level×××
Button control for 1dB and 0.1dB steps×××
Continuous Sweep with manual control×
Input meter and controls
Input Record function×
Free running Voltmeter and Sound Level Meter×××
Integration time: Slow, Fast, Impulse×××
A-Weighting filter×××
C-Weighting filter××
THD reading: % and dB××
THD+N reading: % and dB×
Frequency reading with 0.1 Hz resolution××
Current reading: A, dBAmpere×
Interactive LCR meter×××
L,C,R % readings for easy components selection××
User Interface
Graphics title display×
Recently Opened files history×
Waterfall
Decay analysis with 3-D gesture-controlled graph×××
Color map 3D and 2D display××
Selectable color map shading××
Powerful 3D marker inspection××
Classical Cumulative Spectral Decay×××
Wavelet Cycle Decat for detailed decay analysis××
Polar plots
Circular Polar Plots××
Half Polar Display××
Thiele and Small parameters
Free Air Parameters×××
Added Mass or Known Volume methods for full parameters×××
Direct measurement of ReDC×××
External Hardware Control
Support for Open Source Audiomatica Turntable××

CLIO Pocket system is supplied complete with  accessories to start to get electro-acustics measurements on the go or  in the laboratory, inside the box you find:

  • The CP-01 audio interface
  • The CLIO Pocket SD card with software and drivers
  • The microphone MIC-02
  • One USB 2.0 cable
  • One RCA to RCA 2.7m long microphone cable
  • One RCA to alligators impedance cable