Audio Technica AT33MONO High-End Moving Coil Cartridge for Mono Vinyl records

  • 3 790:-
  • Dual moving coil cartridge designed specifically for use with mono vinyl records.*
  • 0.65 mil conical stylus is mounted on a hard duralumin cantilever
  • Strong, rigid body construction
  • Hanenite anti-vibration, high-damping rubber in the housing interior  and cantilever fulcrum support eliminates unnecessary vibrations
  • PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
  • High-quality brass fastening screw
  • Compatible with stereo playback systems

* This cartridge with 0.6 mil conical stylus is not compatible with SP  (standard play) shellac records. It is designed to play microgroove  33-1/3 and 45 RPM vinyl records.

Cartridge & Stylus
Frequency Response20-20,000 Hz
Channel Separation30dB (1kHz)
Vertical Tracking Angle23°
Vertical Tracking Force2.3-2.7 g (2.5 g standard)
Recommended Load ImpedanceMore than 100 ohms (when head amplifier is connected)
Coil Impedance10 ohms (1 kHz)
DC Resistance10 ohms
Coil Inductance28 µH (1 kHz)
Output Voltage0.35 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance1.0dB (1kHz)
Stylus Shape0.65 mil conical
CantileverDuralumin pipe
Static Compliance20 x 10-6 cm/dyne
Dynamic Compliance6 x 10-6 cm/dyne (100 Hz)
MountingHalf-inch
Dimensions16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D
Accessories IncludedNon-magnetic  screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm ×  2, 19 mm × 2); plastic protector; brush; PCOCC lead wire set
Body MaterialAluminium/Synthetic Resin
Mounting FeatureHalf-inch mount
Stylus SizeNude square shank
TypeMC-type
Weight6.9 g (0.24 oz)
NotesNote: Moving  coil cartridges require receivers or preamps with compatible inputs;  their stylus assemblies are not field-replaceable.