Audio-Technica AT-OC9XSL Dubbel rörlig spole med Special Line contact slipning av nål

  • 7 490:-

AT-OC9XSL Moving Coil Cartridge

Leveranstid ca 3-5 dagar normalt

The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Cartridge & Stylus
Frequency Response20 - 50,000 Hz
Channel Separation28 dB (1 kHz)
Vertical Tracking Angle20 degrees
Stylus ConstructionNude rectangular shank
Recommended Load ImpedanceMin 100 Ohms
Coil Impedance12 Ohms (1 kHz)
DC Resistance12 Ohms
Coil Inductance25 μH (1 kHz)
Output Voltage0.4 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance0.5 dB (1 kHz)
Stylus ShapeSpecial Line Contact
Cantilever0.28 mm Ø nude boron
Static Compliance22 x 10 – 6 cm / dyne
Dynamic Compliance18 x 10 – 6 cm / dyne (100 Hz)
Mounting1/2” centers / Threaded inserts
Cartridge Weight7.6 g
Dimensions17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included1 non magnetic screw driver
1 brush
2 washers
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector
Body MaterialAluminium
ModelAT-OC9XSL
Stylus Size1.5 x 0.28 mil
Terminal PinsBrass
Wire Used for CoilPCOCC (Copper by Ohno Continuous Casting process.)